ProjectID | Number | The Project ID assigned during Phase 1 |
Admin | Text | An Administrative Judgement was issued on an unassessed segment |
Adjustment | Text | Designation of whether segment is in major adjustment |
FEH2Rating | Text | The FEH rating based on Phase 2 parameters |
FEH2Zone | Text | A concatenated field = FEHRating + StreamGroup + Departure + Adjustment |
Departure | Text | Designation of whether segment stream type is a departure from reference |
StrmGroup1 | Text | The Stream Type Group based on Phase 1 parameters |
StrmType11 | Text | The Stream Type (A to G) based from Phase 1 |
StrmType12 | Text | The dominant bed material (1=bedrock, 2=boulder, 3=cobble, 4=gravel, 5=sand) from Phase 1 |
StrmType13 | Text | The slope modifier (a, b, or c) from Phase 1 |
StrmType14 | Text | The bedform from Phase 1 |
RchPtId | Text | The ReachPointID |
StrmType21 | Text | The Stream Type (A to G) based from Phase 2 |
StrmType22 | Text | The dominant bed material (1=bedrock, 2=boulder, 3=cobble, 4=gravel, 5=sand) from Phase 2 |
StrmType23 | Text | The slope modifier (a, b, or c) from Phase 2 |
StrmType24 | Text | The bedform from Phase 2 |
VCGroup | Text | The Valley Confinement Group (1 is >=1 and <4, 2 is >=4 and <10, 3 is >10) |
VSGroup | Text | The Valley Slope Group (a is > 4%, b is <=4% and >=2%, c is <2%) |
Color | Text | Thematic mapping display color for lines based on the FEH Rating |
Label | Text | A concatenated field = FEH2Rating + StreamGroup2 |
RchSegId | Text | The Reach SegmentID |
Ph2SegID | Text | Primary key used to identify the record |
Ph2RchID | Text | Concatenation of the RchPtId and RchSegID - uniquely identifies the segment |
TribID | Text | The TribID |
StrmGroup2 | Text | The Stream Type Group based on Phase 2 parameters |
Phase2YN | Text | Indicates whether a Phase 2 assessment was done (Y=Yes, N=No) |
AdmnEntity | Text | The Administrative Entity that issued the judgement |